| |
 產品介紹 ︱ |
Technical specifications
The SM I pad:
· is manufactured with stress and wear resistant synthetic elastomer;
· fully incorporates a special steel plate which makes the pad transversally rigid, consequently, even in the most extreme operating conditions, the pad does not misplace laterally;
· is not damaged by oil, grease, ozone and by the exposure to ultra- violet rays;
· reduces significantly noise and vibrations;
· greatly reduces load concentrations and fatigue stress;
· eliminates uneven contacts between rails and the support structure;
· protects the crane mechanical components and reduces the wear of wheels, bearings and axles.
Technical and physical specifications of the elastomer:
· Tensile strength: 16 N/ mmq Din 53505
· Extension: 300% Din 53505
· Permanent deformation: 5% (max.) A 23°C
· Working temperature: -30° to 130° C
· Noise reduction: 10% DbA
· Vibration reduction: among 40 et 45%
· Ultimate tensile stress: 120 Kg/cm2
· Lengths available: 6/12 m.
Assembling instructions:
Before laying the pad, the supporting area shall be clean and free of oil,grease and every jut or unevenness, which could damage the pad.
Details:
 |
| |
|
首頁 > 業務內容 > 德國SM
